top of page

Desert Cat: 1/48th Italeri F-14A Tomcat

3 days ago
5 min read

Originally released in 1993 the 1/48th Italeri F-14A Tomcat was designed as a relatively basic build to compete with the Academy kit, as a less expensive option to the complex and detailed Hasegawa offering. Typical of Italeri aircraft kits, their offering is hit and miss mix.


1/48th Italeri F-14A Tomcat

Notable Kit Features:


  • Reasonable cockpit with raised details

  • Recessed panel lines (although not up to par with Academy or Hasegawa)

  • Minimal parts count (for a complex airframe)

  • Variable sweep wings (movable)

  • All control surfaces molded in neutral (No slats & flaps down option here)

  • Decent parts fit overall

  • Weapons include AIM-54 Phoenix; AIM-7 Sparrow and AIM-9 Sidewinders

  • Two-piece Canopy (however no optional parts for canopy open)

  • Model represents an early A model Tomcat


IIAF F-14A Tomcat and crews

Build Inspiration:


This particular build came about when I was selling off a few of my kits / builds earlier this year. When buyers would come by to pick-up their purchase, I would offer a tour of "The Hangar" if they were interested. This particular gentleman was a former Iranian Air Force pilot and during our discussion he mentioned that he had built a few kits in the past. He started building a collection of IIAF types and had them all painted up, but hadn't gotten around to the decals (as in most cases they had to be third-party sourced). He was so appreciative of the tour, he wanted to gift me the F-14A Tomcat he had built as I didn't have any IIAF aircraft in my collection. I in turn promised I would finish off his "Persian TomCat" for him. We made arrangements to meet up a few weeks later and he passed over his Tomcat to me (as well as the IIAF decals he had bought). After I got home, I did an assessment on what it would take to complete the Iranian F-14. Being a bit of a stickler for details (and having some decent references), I noted that the IIAF colours were off a bit (the Italeri kit only provided US Navy paint references and decals). Since I was planning on finishing off the Iranian F-14, I politely requested that if it was alright by him, I recommend I do a repaint prior to application the decals to better represent the true colours of his aircraft. He whole heartedly agreed that this extra step would make for a better Persian Cat, so all I needed now was the time for this new endeavour.


1/48th Italeri F-14A Tomcat

Heads-Up Report:


  • Cockpit detail is okay if you are not focused on the accuracy of this aspect

  • Ejection seats are passable (but replacement would be an noticeable improvement)

  • General fit will require filling and sanding in a number of places (but is probably a bit better than the Academy kit due to the nose fit issues)

  • The swing-wing feature is a nice option but leaves larger gaps to accommodate the movement of parts

  • Recessed panel lines are "soft" (not fine) same goes for the rivets (Academy kit is superior here)

  • The model represents an early "A" model tomcat with the early gas gun vents

  • Panel lines are not correct in places, however general lines seem good


1/48th Italeri F-14A Tomcat

Kit Additions / Modifications:


As part of the project, I had to disassemble any parts of the F-14 I could, to make the pending repaint easier. Luckily the deconstruction went well and there was minimal breakage.

  • Used Hi-Decal F-14A Tomcat HDL 48021 decal sheet for the IIAF markings


1/48th Italeri F-14A Tomcat

Finishing:


Once I had the main components separated, I sanded down the old paint, cleaned up the seams with some filler and more sanding. Next came a coat of primer gray to check my work and form up the underside colour (FS36622). The Persian Cat camouflage scheme is a bit unusual, as it consists mainly of a sand coloured base, with darker green and brown streams running through it. I deemed the masking process would be easier if I reversed the normal paint order. (Typically I start with the lightest tone and cover that paint with darker stages of camouflage until done.) However in this case, I thought it best to spray the Dark Brown (FS30140) first, wait for that to dry and mask it off, then spray the Dark Green camouflage (FS34079), as this would minimize masking. Once that was all taped off I could now spray the Desert Sand paint (FS30400). I did notice that this paint order made it more difficult to completely cover the darker paint with the lighter one, however after a few sets, it was mission accomplished. Each coat of paint was weathered during the paint process, by adding slightly darker and lighter paint tones where appropriate. After sufficient paint drying time, a gloss coat was sprayed using Pledge floor finish to prepare for decals and washes. The Hi-Decals he bought were great quality and went on the model well. Panel washes were added, followed by wipe-down with the airflow to gain the final paint weathering detail. Once cured, a Model Master matte coat was sprayed over everything to seal the decals in and complete the dull finish.


1/48th Italeri F-14A Tomcat

The After-Build Report:


The 1/48th Italeri F-14A Tomcat isn't a bad kit. I rate it a bit easier build than the Academy kit, however the detail isn't as good as Academy, especially in the surface panel lines. Either of these two kits are contenders if you are looking for a Cat with recessed panel lines, on a budget . Due to the complexity of the aircraft structure, probably best to have a few kits under your belt before tackling any Tomcat, however it is a magnificent beast to have in your display collection. The variety of markings that adorned these aircraft, as it transitioned through the high-visibility colourful early birds to the later all grays, plus the Desert Cats & NSAWC versions, make the F-14 Tomcat a must have model for jet aircraft enthusiasts.


1/48th Italeri F-14A Tomcat

If spend is not a factor and you want a great fitting kit with few hassles. (The trade-off being no option for slats n flaps down.) the 1/48th Tamiya F-14 offerings may best suit your needs, The later production (post-improvements) Hasegawa F-14 kits are still contenders (the price has now dropped considerably with competition). Hasegawa has the slats and flaps down option and good detail throughout. If you are willing to spend time and patience on the build the 1/48th Hasegawa Cat will turn out impressive, but it will claw you during the process. AMK has now jumped in with their detailed Cat as well as HobbyBoss, however a lot of critiques followed these two kits as well. (I have not built either one of these Cats so far, so cannot add to the mix.) A shout-out to Vahid for getting the first IIAF aircraft into "The Hangar" here, with this elegant Tomcat. - Cheers


Completed Joint Project Build #307 - August 2026 using the 1/48th scale Italeri #2667 kit.


Feel free to comment or ask any questions - Keep on building, gain experience, challenge yourself if you like, but try not to stress yourself out over the build - it is supposed to be an enjoyable hobby after all ;)


1 Comment


Spyridon Pentedekas
Spyridon Pentedekas
22 hours ago

Congratulations! A wonderful result and a very inspirational build.

Like

Subscribe Form

Thanks for submitting!

We will let you know when the next article is released.

©2025 by Fly Past Rush

bottom of page